Instrument calibration/drift correction.
a. Login a minimum of 3 Standard replicates.
b. Weigh a ~1.000 gram of a calibration/drift standard, enter the mass and standard identification into appropriate replicate fields.
c. Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.
d. Place the calibration/drift standard into the open port at the top of the loading head.
e. Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.
Cornerstone氧氮氢分析软件同时支持***的数据文档格式和可变的报告格式。浙江专业元素分析仪优惠价格
氧氮氢分析仪的优点
采用惰气熔融技术,同时测定氧、氮和氢元素含量
新设计封闭气路系统,优化气路循环,使氧氮氢测量更准确
可采用更廉价的氩气作为载气
催化炉温度可调,使氧的测量更加准确
气路系统都采用电磁阀控制,新增分段式漏气检测
水冷样品加样端口,有效隔绝杂质气体侵入
仪器配置和氧、氮、氢测量范围可灵活选择
新设计的高灵敏度红外检测池和热导池,有极低的检出限
分析时间短
脉冲炉功率高达8.5kw,温度3000℃
颗粒状样品无需胶囊包裹,使用经济实惠
化学试剂及管路隐藏在门后(可移除)
强大的分析软件(支持数据和应用报告导出、增加评论区及其他更多功能)。
单点和多点校正(线性回归)
可采用自来水、冷却循环水机或交换机冷却
新设计的产品可用于各类生产控制和实验室。
Instrument calibration/drift correction
f. Clean the upper and lower electrode manually, or, if applicable, remove the crucible and press the analyze button to clean with the automatic cleaner.
g. Firmly place a graphite crucible on the lower electrode tip.
h. Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.
i. Repeat steps 3b through 3h a minimum of three times for each calibration/drift standard used.
. Calibrate/drift following the procedure outlined in the operator's instruction manual.
Software Features & Benefits
Cornerstone brand software is divided into four main sections—Analysis, Diagnostics, Settings, and Instrument—for simplified navigation and organization. Toolbars, sliders, and drop-down menus makeit easy to set parameters for calibration and data processing. The software also includes real-time ambient monitors, with fully animated system diagrams. Advanced diagnostic features include a thorough digital on-board manual, maintenance animations, photo illustrations, and screen captures that quickly provide the direction needed without having to refer to multiple manuals. also Cornerstone supports extended data archiving and flexible reporting capabilities. 20位试样自动进样系统。
company profile
Shanghai Uzong Industrial Co., Ltd. (hereinafter referred to as UZONGLAB®) is a high-tech company that provides integrated solutions for intelligent laboratories, mainly serving the Chinese market and countries along the “Belt and Road”. It has three business divisions and one The technology center, namely the instrument business department, consumables business department, project development department, and Zhongyu Lianhe Technology Center. In addition to the Shanghai headquarters, we have established branches in Beijing, Shenyang, Shijiazhuang, Taiyuan, Qingdao, Guangzhou, Chengdu and Urumqi. To provide customers with more professional, safer and more convenient products and services is our sole goal. 新型气路管道减少气路连接阀,使得漏气,断路故障更少。浙江LECO氧氮氢分析仪优惠价格
为可**的Cornerstone 氧氮氧分析软件采用触摸屏界面使用户达到分析控制、15法设定、在线诊断、数据报告。浙江专业元素分析仪优惠价格
力可ONH836氧氮氢分析仪
特点和优势
国际**的非色散红外及热导检测器 ,无移动部件,不需要手动调整
采用三个**的红外器检测氧含量,同时检测CO和CO2,然后在转化为CO2集中检测,原理上是**完善的,所以不仅可以保证中间量程的测量精度,在**含量和高含量的检测范围内同样可以满足精度要求
高性能的红外检测器配置***恒温绝热技术,消除了外界环境温度的干扰
长寿命的红外发射光源和无漂移的电路设计保证检测器的长期稳定性
力可**的动态流量补偿控制DFC系统,保证了流量系统的完善,可以精确控制整个气路中的流量,保持流量恒定**改善了材料中氮分析的准确度
可以旁路的OMI-2 气路强化过滤装置增强了检测器的稳定性,使得分析结果更加准确
可选自动功能
20位试样自动进样系统
通用下电极坩埚支座,容纳各种坩埚使用
无需人工干预的全自动清扫系统
浙江专业元素分析仪优惠价格
Procedure–Powder/ChipSamplesInstrumentcalibration/...
【详情】Procedure-SolidSamplesInstrumentcalibration/driftc
【详情】Procedure–Powder/ChipSamplesDeterminetheinstrument...
【详情】氧氮氢分析仪的常见故障及解决方法供电正常、通讯正常,点击确认键后分析仪不工作。这是没有水流,炉子温度...
【详情】Instrumentcalibration/driftcorrectionf.Cleantheupp
【详情】Procedure–Powder/ChipSamplesDeterminetheinstrument...
【详情】SamplePreparationTypically,titaniumandzirconiumsam
【详情】InstrumentHighlightsandFeaturesOptionalFeaturesOpt
【详情】